AA517PAALL – Changes by region

The Changes by Region report will display the current appraised building, land and total value compared to the previous appraised building, land and total value.  The range of parcels can be defined by an IDLIST, beginning and ending date range, region, or by reason code.

 

The report will display the following fields for each parcel:  Muni Code,  Region, Parcel ID, Reason Code, Current Building, Land and Total Values, Previous

Building, Land and Total Values, Difference between Current and Previous Totals and Percent of Difference.

 

The date range is an optional field in this report.  If it is left blank it will pull all parcels that are listed in either the IDLIST or parcel range.  If the date range is entered it will pull only the parcels that were changed between the given dates.

NOTE:  The specific fields with permissible entries to be filled in or left blank are listed below. Ignore fields that are not in the list next to the screens.

 

Figure 1. SY41 (TOP)

 1. Job: Report name should always appear here. For example, AA517PAALL.

 2. Server Name: Keep the server name that first appears.

 3. Printer_Name: Select a valid printer or keep the displayed printer if one is present.

 4. Jurisdiction: Enter your jurisdiction.

 5. Tax Year: Enter the current Tax Year.

 6. Spool File Name: Enter AA517PAALL.LIS to create the file in text format.

 7. Beginning Date: Enter the beginning date for changes. (Date range is optional in this report; if used only the parcels with changes between the date ranges will be printed on the report)

 8. Ending Date: Enter the ending date for changes.

 9. ID1: Enter the beginning Parcel ID or IDLIST.

 10. ID2: Enter the ending Parcel ID or IDLIST setname.

 13. FCU: Formatting code. Keep the default printer setting that is present when the screen appears. If blank, enter HPL180.

 16. PARAM1 Region: Enter the region number. If blank all regions will print.

 17. PARAM2 Reason Code: Enter the reason code. If blank all regions will print.

 

 

Figure 2. SY 41 (BOTTOM)

Press [Submit Job]. The system will notify you when the report is finished.

 

Updated 8/10/2006